home *** CD-ROM | disk | FTP | other *** search
- Path: lenny.rosenet.net!usenet
- From: costmo@rosenet.net (Christopher Ostmo)
- Newsgroups: comp.dcom.modems
- Subject: Re: is 28.8 ALWAYS so jumpy! (multitech <-> anything)
- Date: Thu, 14 Mar 1996 07:12:38 GMT
- Organization: Rosenet, Inc.
- Message-ID: <4i8giq$m63@lenny.rosenet.net>
- References: <4hjc36$2om@newton.uncg.edu> <Dnv70t.743@freenet.carleton.ca> <4hn0tq$eh4@newton.uncg.edu>
- Reply-To: costmo@rosenet.net
- NNTP-Posting-Host: ppp056.rosenet.net
- X-Newsreader: Forte Free Agent 1.0.82
-
- rjadams@prin.uncg.edu (Robert Adams) wrote:
-
- >Anthony Hill (an171@FreeNet.Carleton.CA) wrote:
- >: Robert Adams (rjadams@prin.uncg.edu) writes:
- >: > the modem is one of the "BA" externals, off of a cyclades 8 port serial
- >: > card... firmware 2.06 (i _think_, id have to drop carrier to check)
- >:
- >: Well upgrading the firmware would be a good place to start, 2.07
- >: was the first fairly reliable firmware. The current firmware is 2.12 or
- >: 2.13 (depending on which BA model you have). Since theses modems support
-
- >I got 2.13 and it fixed the problem.. thanks!
-
- >Robert
- Hello,
-
- There is also a firmware upgrade (ver 3.12) for modems with ver
- 3.09... Call Multitech to make sure that you get the proper upgrade
- or it will make the problem worse.
-
-
- Christopher Ostmo
- a.k.a. costmo@rosenet.net
- Rosenet, Inc.
- (541) 440-1447
-
- For a good time,
- http://www.rosenet.net
-
-